Loose stacked boxes and products other than carton boxes (like jute and paper bags) of various sizes – mixed loaded – are taken at high speed out of a container by the Copal C2. The goods are placed directly onto a telescopically extendable conveyor belt.
The conveyor belt can be connected directly to existing internal logistical systems. The Copal C2 has an average speed of 1800 boxes per hour. A top speed of 3600 boxes an hour is possible, depending on the dimensions of the boxes.
The operator can control the machine entirely from his comfortable cabin. The manipulator’s controls are designed so that the operator can perform all necessary operations with joysticks, supported by an advanced PLC control system. The C2 is driven into the container from the docking station. The conveyor belt follows automatically correcting for height differences.The advanced lifting technology ensures that up to 350 kg lifting power is available each time.
The machine is fitted with various laser sensors for the correction of human errors. Cameras enable the entire process to be seen at a glance. The system is fitted standard with transverse transmission so that it can be driven from dock to dock.
The Copal C2 drives into the container with only the cabin and gripper. Because the compressed air supply is situated outside the container, fresh air is blown into the container at each operation, so residual gases remaining after degassing disappear. Also a pressurized cabin ensures clean air. This results in a healthy working environment.
Special software has been developed for the C2 Container unloader. Repetitive operations have been extensively automated. The system corrects height differences between the container and forwarding floor, by lifting the frame of the C2 system. The machine continually measures distances in the available space, preventing damage. The operator can control the system with two joysticks while seated in his comfortable seat. He can see the whole process on a screen.
The Copal C2 Container Unloader makes it possible to automatically unload floor loaded mixed containers and products other than carton boxes (such as jute and paper bags) without any physical load.
The Copal C2 can be used in every logistical centre where completely filled standard and high cube containers (20, 40 or 45 ft) can be immediately unloaded. The machine can be directly connected to the internal logistical system. For instance at cold stores, warehouses and distribution centres. Manual sorting and palletizing is of course also possible.
The machine saves a lot of time and physical effort. The C2 is not only a solution for this, but it also ensures faster and more efficient production and turnaround time.
The C2 has a telescopically extendable conveyor belt up to 15 metres into the container.
The Copal C2 can be extended with among other things:
Unload mixed container loads automatically! We will be glad to help you, please do not hesitate to contact us.
By using the Copal C2 you save directly on manpower and increase the flow of goods.
The Copal C2 Container Unloader unloads mixed containers loads with boxes or sacks effortlessly.
1 employee can unload a container within 1 hour.
The Copal C2 is an intelligent machine, solidly built and needs little maintenance. The machine can be connected to warehouse management systems. This means the C2 can be used in any environment.